USED SANSI 36W LED Motion Sensor Security Light Dusk to Dawn Floodlight Outdoor

Description

USED
SANSI 36W Dusk to Dawn LED Security Lights
Keep Your Family Safe with SANSI LED Security Lights!
Compared with other security lights, SANSI LED security motion-activated light can be rated at 3600lm just with 36W, which is far brighter to provide security for your home or business accommodations. You could cut down your electricity bill by up to 85%.
Compared with traditional motion sensor light for outdoor, it has more working modes. Not only owns Test, and Auto Mode but also includes Dusk to Dawn Mode and On-Time Mode. 4 different working modes will meet your needs.
PACKAGE INCLUDED:
1 x SANSI LED Security Light
1 x Bar-shaped Mounting Plate
1 x Waterproof Gasket and 3 x Screws
3 x Wire Connectors
1 x Mounting Bolt
1 x Rubber Screw Plug
1 x Instruction Booklet
Four Kinds of Working Modes:
TEST MODE
Set-up:
Put the "Mode" switch in the Test position.
Function:
The light turns on for only 5 seconds during daytime or night once it detects motion.
This mode is used for checking whether the sensor is working properly.
Test Mode can work during the daytime and night. Except for Range, the Lux and Time Setting doesn't work while using this mode.
AUTO MODE
Set-up:
Put the "Mode" switch in the Auto position.
Function:
When the sensor detects motion, it lights up for 1-10 minutes according to the time it has been set.
While using the auto mode, the toggle switches off and 2 seconds later on again. The light turns on continuously for ca. 8 hrs and goes off in the daytime.
Auto Mode only works at night. When it's bright (> 100-150 LUX) around the sensor, the light goes automatically back to Auto Mode.
ON-TIME MODE
Set-up:
Put the "Mode" switch in the On-Time position.
Function:
Light can work as a standard LED light without motion sensing.
The light turns on when switched on, and turns off when switch off.
On-Time Mode can work during the daytime and night. The Lux, Time, and Range Setting doesn't work while using this mode.
DUSK TO DAWN MODE
Set-up:
Put the "Mode" switch in the D2D position.
Function:
The light turns on automatically at dusk or night and turns off at dawn or if it’s too bright for your sensor.
D2D Mode only works at night. When it's bright around the sensor, it goes off automatically. Except for Lux, Time and Range don't work while using this mode.
Three Setting Knobs:
Sensor Sensitivity
For setting ambient brightness value to differ from daytime to night. If the ambient brightness value exceeds the setting Lux, it is defined as "daytime"; otherwise it's known as "nighttime".
Position 0 equals 3 Lux, Position ∞ equals max Lux and it's always regarded as night no matter how bright around the sensor.
Lux setting only works in Auto Mode and D2D Mode.
Detecting Range
Rotate the knob to adjust the sensing range to max ca. 50ft motion coverage.
When you mount the light over 7.8ft, please adjust the sensor upwards and set the max range to increase the coverage area. Time setting only works in Auto Mode.
Range setting only works in Test Mode and Auto Mode.
Stand By Time
Time knob is used for setting working time from 1-10 minutes when it detects motion.
Time setting only works in Auto Mode.
Attention
Make sure that there are no infrared or ambient lights pointing towards the motion sensor.
Make sure that there are no other influence factors that affect the performance of light.
Be sure to disconnect the power before you install the light.
Be sure to mount it in a dry location, a humid environment is not good for light's lifespan.
Smart IC
SANSI Independent design
Auto power adjustment
More safety
PC+Ceramics
High light efficiency
Super-Long lifespan
Better heat dissipation
Sensor Sensitivity
LUX: 0-∞ LUX(Recommend to set LUX to 12 o'clock pos
Time:1-10 minutes
Range:0-72 ft
SANSI Ceramic LED Security Motion Sensor Outdoor
Flood
Lights,
36W (250W Equivalent) 3600lm, 5000K Daylight,
Dusk to Dawn
Function,
IP65 Waterproof  Light, ETL Listed, White, Wide
application for
Garden, Yard, and Doorway induction
Bring Safety to Your Home
: SANSI LED Security lights can turn on automatically when the
motion is detected, sensing light
levels and motion with a range of 180 degrees and a max of
50 feet. And the light is IP65 waterproof which ensures that the light
could work outdoor in
rainy weather.
Super Brightness
: This 36W led flood light outdoor is rated at 3,600 lumens, which provides
efficient lighting for your exterior living
environment.
Energy Efficient
: 36W motion sensor light is equivalent to 250W incandescent light, it helps
you save money and have a long
lifespan of 50,000 hrs, 22.8 years ( based on 3 hrs/day).
Adjustable Design
: There are four working modes, Test Mode, Auto Mode, On-Time Mode,
and Dusk to Dawn Mode. More
choices can meet the different demands of each customer.
Choose the most appropriate model for your needs and desires.
What Your Get From SANSI
: The LED Security Light with two lamp heads and a motion
sensor, a bar-shaped mounting plate
and 3 screws, a waterproof gasket, 3 wire connectors,
a mounting bolt, and a rubber screw plug. And our fan-favorite 5-year warranty
and friendly
customer service.
Power: AC90-132V ​(110V-130V)
Output: 36W
Lumen: 3600LM
Length of Cord: 15 inch
CRI: >80
Colour Temperature: 5000K
Material: Ceramic, PC Aluminum
Working Temperature: -25℃～40
On Sep 12, 2022 at 18:25:05 PDT, seller added the following information: