LMI G Series Metering Pump SG5688P 75 GPH, 150 psi, PVC, Manual Control

Description

LMI Series G Metering Pump.
75 GPH @ 150 PSI, PVC Liquid End (ETL Certified to conform to ANSI/NSF STD 50).
115/230 VAC, 60 Hz, 1 Phase.
Manual Stroke Length Control
Manually adjustable eccentric stroke length control, stroke frequency is fixed.
General Description
LMI Series G chemical metering pumps shall be motor driven mechanically actuated positive displacement diaphragm type pumps. Precision stroke adjustment can be operated while the pump is running or stopped from zero to maximum capacity.
Pump Controls
The stroke frequency will be fixed. Stroke length shall be adjustable by a readily accessible dial knob located adjacent to the liquid handling end.
Drive Assembly
A robust metallic, worm gear drive coupled with the industrial duty variable eccentric stroke adjustment mechanism yields a 10 to 1 turn down ratio. All gear components operate in an oil bath for long life.
Materials of Construction
See Specifications tab. Chemical metering pump housing is a durable, metallic housing designed to withstand tough environments. All exposed fasteners shall be stainless steel. Valves shall be serviceable by replacing the cartridge valve assembly.
WARNING: A pressure relief valve MUST be installed in the discharge line of all motor driven pump (order as a separate line item)
.
THIS PUMP RETAILS FOR OVER ,300.00!!!
FOUND ELSEWHERE FOR OVER ,100.00!!!
SAVE BIG HERE!
Not what you are looking for? Check out my other listings...